Evco EPK4LHX Hardware manual Instrukcja Użytkownika Pobierz pdf (Strona 13)

EVCO S.p.A. c-pro 3 NODE kilo | Hardware manual ver. 1.0 | Code 114CP3NKE104

page 13 of 44

DIGITAL OUTPUTS

Digital outputs.

PART MEANING

CO1 common digital output 1

NO1

usually open contact for digital output 1

according to model:

electromechanical relay with 3 A res. @ 250 VAC

control for 24 VAC/DC, 600 mA max. solid state relays

CO2 common digital output 1

NO2

usually open contact for digital output 2

according to model:

electromechanical relay with 3 A res. @ 250 VAC

control for 24 VAC/DC, 600 mA max. solid state relays

CO3-6 common digital output 3... 6

NO3 usually open contact for digital output 3 (electromechanical relay with 3 A res. @ 250 VAC)

NO4 usually open contact for digital output 4 (electromechanical relay with 3 A res. @ 250 VAC)

NO5 usually open contact for digital output 5 (electromechanical relay with 3 A res. @ 250 VAC)

NO6 usually open contact for digital output 6 (electromechanical relay with 3 A res. @ 250 VAC)

CO7 common digital output 7

NO7 usually open contact for digital output 7 (electromechanical relay with 3 A res. @ 250 VAC)

NC7 usually open contact for digital output 7

CAN/RS-485

RS-485 MODBUS slave, RS-485 MODBUS master/slave and CAN CANBUS ports

The communication protocol for the RS-485 MODBUS master/slave port can be set with the UNI-PRO 3 development environment.

For the settings for the RS-485 MODBUS slave, RS-485 MODBUS master/slave and CAN CANBUS ports, please refer to chapter 6

“CONFIGURATION”.

PART MEANING

CAN+ CAN CANBUS port positive pole

CAN- CAN CANBUS port negative pole

GND RS-485 MODBUS slave, RS-485 MODBUS master/slave and CAN CANBUS ports ground

A1/+ RS-485 MODBUS master/slave port positive pole

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

Brak uwag

Evco EPK4LHX Hardware manual Instrukcja Użytkownika Strona 13